Safesmiths Catalog Field reference · pilot

Sargent & Greenleaf 8560

  • Maker Sargent & Greenleaf
  • Also called 8560-100; 8560-004
  • Families S&G Magic Module footprint (mounting-compatibility group)
  • Status active

Summary

Specifications

rating

Listed on the sheet as Group 1R.

Model 8550, 8560 Installation and Combination Changing Instructions, March 2007 · Sargent & Greenleaf, Inc. · 2007

Chart marks (Model 8560): UL/ULC Listed Group 1R; RoHS2 Compliant. Cells not marked are blank in the chart, which is not a statement that the lock lacks the certification.

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

UL Listed combination locks, Group 1 and Group 1R: models 8550, 8555, 8560, 8565 and 2937 (UL certificate 20140106-BP200, report BP200-19750519, issued 2014-01-06 to Sargent & Greenleaf Inc). Investigated by UL under UL 768, Combination Locks. The certificate does not assign a group to each model.

UL Certificate of Compliance 20140106-BP200, Sargent & Greenleaf combination locks Groups 1 and 1R (8550, 8555, 8560, 8565, 2937), 2014-01-06 · UL LLC · 2014

Mechanical Safe Lock Features Chart (rev 6/23/2014), column 8560 Series: UL Listed Group 1R; 3 wheels; 1,000,000; ±0.5. Footnote: typical dialing tolerance is what you would expect in an installed lock; theoretical tolerance is always slightly greater.

Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014

relockers

Internal relock trigger.

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

lock dimensions

Most common mistake: dialing a number to the wrong index.

Model 8550, 8560 Installation and Combination Changing Instructions, March 2007 · Sargent & Greenleaf, Inc. · 2007

Correcting it: remove the cover and line the wheel keyways up by passing a straightened paper clip through the small hole in the case bottom (use whichever of the two holes matches the change key hole).

Model 8550, 8560 Installation and Combination Changing Instructions, March 2007 · Sargent & Greenleaf, Inc. · 2007

Then refit the cover, insert the change key, turn it a quarter turn counterclockwise, dial the new combination at the changing index, turn back and withdraw the key.

Model 8550, 8560 Installation and Combination Changing Instructions, March 2007 · Sargent & Greenleaf, Inc. · 2007

After setting a new combination, try it at the opening index at least 3 times, and also with the dial half a number above and half a number below.

Model 8550, 8560 Installation and Combination Changing Instructions, March 2007 · Sargent & Greenleaf, Inc. · 2007

Lock template offsets for RH, LH, VU and VD mounting: 11/16 in (17.5 mm), 13/16 in (20.6 mm) and 1-15/16 in (49.2 mm); the fractions agree with the metric values.

Model 8550, 8560 Installation and Combination Changing Instructions, March 2007 · Sargent & Greenleaf, Inc. · 2007

order code

8560-100 kit: three acetal resin wheels, dial D054, ring R162, black and white Spy-Proof dial, UL Listed Group 1R. 8560-004 lock body: three acetal resin wheels, UL Listed Group 1R. 8560 radiological push-dial: left-right-left dialing, push to open, resin wheels for x-ray protection.

Sargent and Greenleaf 8500 Series Group 1 and 1R Mechanical Combination Locks product page, sargentandgreenleaf.com, accessed October 2026 (JS-rendered) · Sargent & Greenleaf (ASSA ABLOY) · 2026

catalog date

1989-12

drawing dimensions

Dimensions-Standard Size Mechanical Lock Case (rev 6/23/2014), as printed, 'valid for all 2937, 6600, 6700, 8400 and 8500 series locks': case 3.343 (84,9 mm) x 2.397 (60,9 mm); mounting holes 2.624 (66,6 mm) x 1.624 (41,2 mm).

Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014

spindle centre to the bolt-side hole column 1.937 (49,2 mm); bolt 1.000 (25,4 mm) high, bolt throw 0.35 (8,9 mm), bolt.312 (7,9 mm) thick, 0.281 (7,1 mm) from the case back edge.

Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014

Case depth: 1.121 (28,5 mm) for 2937, 6600, 6700 and 8500 series 3-wheel locks; 1.334 (33,8 mm) for 6600 and 6700 series 4-wheel locks; 1.407 (35,7 mm) for 8400 series 3-wheel locks.

Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014

(Q43 resolved: standard mechanical / 8500-series 3-wheel case depth is 1.121 in (28.5 mm) per this page; the 2001 catalog's 1.211" next to the same 28.5 mm was a digit transposition.).

Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014

feature function

Dialed left-right-left (printed on the product pages as "familiar left-right-left dialing"). Individual dialing turns and counts are not printed.

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

Steps not printed. The page says the wheel pack is key-changeable (a change key is used; change keys are listed later in the catalog).

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

torque adjuster: yes; false gates: no; internal relock trigger listed; acetal resin wheels, described as x-ray protection. Rating mark: UL/ULC Listed Group 1R.

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

Not printed in this catalog (anti-autodialer feature).

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

Handling setup (R6730 and 6735, 8550 and 8560 and 8565MP): This design uses the S&G 4 way drive cam. The 4 hand positions (Right Hand, Left Hand, Vertical Up, Vertical Down) are produced by 4 spline key ways inside the drive cam, or 2 spline key ways on that cam as well as the spindle

Sargent and Greenleaf Adjusta-Loc Installation Instructions, 630-150 Rev. 11/88 · Sargent & Greenleaf

The S&G product page: 8500 Series / Group 1 page: modeled on S&G's original MP manipulation proof locks.

Sargent and Greenleaf 8500 Series Group 1 and 1R Mechanical Combination Locks product page, sargentandgreenleaf.com, accessed October 2026 (JS-rendered) · Sargent & Greenleaf (ASSA ABLOY) · 2026

Glossary terms: a torque adjuster adds wheel friction against vibration and rapid-spin attacks; a false gate is a shallow decoy cutout in a wheel; an internal relocker deadlocks the bolt after a spindle-hole punch-through that dislodges the back cover.

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

Operation: wheel centers, levers, bolts and cams are brass; three wheels give about 1 million theoretical combinations; a torque adjuster sets wheel pack tension; wheels can be re-keyed; internal relock trigger; Centi-Spline dials; Spy-Proof dial with black and white finish.

Sargent and Greenleaf 8500 Series Group 1 and 1R Mechanical Combination Locks product page, sargentandgreenleaf.com, accessed October 2026 (JS-rendered) · Sargent & Greenleaf (ASSA ABLOY) · 2026

Warranty: limited, one year counted from the shipment date (terms of 2026-10).

Sargent and Greenleaf 8500 Series Group 1 and 1R Mechanical Combination Locks product page, sargentandgreenleaf.com, accessed October 2026 (JS-rendered) · Sargent & Greenleaf (ASSA ABLOY) · 2026

spring-lever fence: yes. This is an anti-manipulation feature.

Model 8550, 8560 Installation and Combination Changing Instructions, March 2007 · Sargent & Greenleaf, Inc. · 2007

lock options

Order numbers as printed: 8560-100 kit, 3 wheels, acetal resin wheels, D054, R162, Spy-Proof, black and white, UL Listed Group 1R; 8560-004 lock body, 3 wheels, acetal resin, UL Listed Group 1R.

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

relocker present

Relock trigger is a standard security feature on 8500 Series models.

Intelligence Materiel Division Technical Data Handbook No. 2, Combination Locks, September 1997 · 1997

specifications

Chart row (Model 8560): 3 wheels; theoretical combinations 1,000,000; typical dialing tolerance +/- 1.0; wheel center Brass; wheel case Acetal Resin; bolt Brass; cam Brass; locking levers 8; false gates No; torque adjuster Yes.

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

Footnote definition of the listed group: Group 1R is 20 hours of resistance to expert or professional manipulation plus 20 hours of radiological attack.

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

8500 series: manipulation resistance tested by Underwriters Laboratories at over 20 man-hours; three wheels give 1,000,000 theoretical combinations; left-right-left dialing with push to open.

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

Installation: fasten the lock with the four supplied 1/4 x 20 screws; loosely attach the dial ring with its opening index at 12 o'clock.

Model 8550, 8560 Installation and Combination Changing Instructions, March 2007 · Sargent & Greenleaf, Inc. · 2007

Turn the dial counterclockwise to zero at the opening index, then one more full turn; match the spindle keyway to the cam's spline keyway (VU, RH, LH or VD mounting).

Model 8550, 8560 Installation and Combination Changing Instructions, March 2007 · Sargent & Greenleaf, Inc. · 2007

At 50 the accelerator spring should be loaded and stay that way when the dial is pushed in.

Model 8550, 8560 Installation and Combination Changing Instructions, March 2007 · Sargent & Greenleaf, Inc. · 2007

S&G 8500 Series: Universal model superseded separate RH/LH models; all models feature a relock trigger as standard.

Intelligence Materiel Division Technical Data Handbook No. 2, Combination Locks, September 1997 · 1997

Group 1 and Group 1R Mechanical Safe Locks page (rev 6/23/2014). 8560 Series: UL Listed Group 1R; also tested by UL against 20 man-hours of radiological imaging attacks. Three wheels (brass and aluminum or acetal resin), 1,000,000 combinations; manipulation resistance verified by UL to exceed 20 man-hours; internal relock trigger; mounts RH, LH, VU, VD. Lock bodies 8550-003 (U.L. Group 1, metal wheels), 8560-004 (U.L. Group 1R, acetal resin wheels); locks with D054 Spy-Proof B&W dial and ring 8550-100 (Group 1), 8560-100 (Group 1R). Dials & rings for 8500 Series: D054-004/R162-002 B&W Spy-Proof; D540-004/R167-002 B&W Spy-Proof; D540-006/R167-014 satin chrome Spy-Proof.

Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014

Critical parts are brass and aluminum; key-changeable wheels; internal relock trigger; torque adjuster.

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

Model 8560: acetal resin wheels for x-ray protection; Underwriters Laboratories tested it for 20 man-hours against radiological imaging attacks.

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

Thread the dial and spindle into the drive cam until it meets the ring surface; do not let the cam slide outward against the accelerator spring. The dial should sit flush and centered in the ring.

Model 8550, 8560 Installation and Combination Changing Instructions, March 2007 · Sargent & Greenleaf, Inc. · 2007

Trim the spindle that sticks out past the cam and bevel its end slightly; tighten the ring screws; slip a flat washer, compression spring and second flat washer over the spindle into the recess in the dial hub.

Model 8550, 8560 Installation and Combination Changing Instructions, March 2007 · Sargent & Greenleaf, Inc. · 2007

Tap the spline key in gently with its tip toward the cam edge, avoiding the stainless roller on the cam. The dial must spin freely.

Model 8550, 8560 Installation and Combination Changing Instructions, March 2007 · Sargent & Greenleaf, Inc. · 2007

Accelerator spring test: after one full turn stopping at zero it should be loaded; pushing the dial in at zero, releasing it and taking off the cover should show it released.

Model 8550, 8560 Installation and Combination Changing Instructions, March 2007 · Sargent & Greenleaf, Inc. · 2007

If not, pull the spline key, hold the cam, make one more counterclockwise turn, fit a new spline key and repeat.

Model 8550, 8560 Installation and Combination Changing Instructions, March 2007 · Sargent & Greenleaf, Inc. · 2007

Dial the factory combination (left to 50 four times, right to 0, push in, release, right until the dial stops near 85) and watch the drop lever fall into the cam gate; do this at least three times.

Model 8550, 8560 Installation and Combination Changing Instructions, March 2007 · Sargent & Greenleaf, Inc. · 2007

Optional tube kit U24: fit it, mark the tube where it leaves the spindle hole, move the mark.120 in (3 mm) toward the tube end and cut off the excess.

Model 8550, 8560 Installation and Combination Changing Instructions, March 2007 · Sargent & Greenleaf, Inc. · 2007

Dialing: the ring has two index marks, the upper for normal dialing and the one left of it for changing the combination. If a number goes past the index, redial the whole combination.

Model 8550, 8560 Installation and Combination Changing Instructions, March 2007 · Sargent & Greenleaf, Inc. · 2007

Do not push the dial in until the combination is dialed and the dial is back at zero.

Model 8550, 8560 Installation and Combination Changing Instructions, March 2007 · Sargent & Greenleaf, Inc. · 2007

Opening on the factory combination: left, stopping at 50 on the fourth pass; right to 0 on the first pass; push in and release; turn clockwise until the bolt retracts, with a positive stop near 85.

Model 8550, 8560 Installation and Combination Changing Instructions, March 2007 · Sargent & Greenleaf, Inc. · 2007

four models: 8550 — three brass wheels, no tube (8550-UNI present; 8550-COM/OLM obsolete); 8555 — three brass wheels, with tube (8555-UNI present); 8560 — three X-ray-proof wheels, no tube (8560-UNI present); Designed for right-hand, vertical-up or vertical-down; Universal covers left-hand.

Intelligence Materiel Division Technical Data Handbook No. 2, Combination Locks, September 1997 · 1997

The dial can be pushed in; this is distinct from a loose dial or a loose spindle. A spring lever holds the fence away from the wheel pack until the dial is pushed in, which indicates a spring-lever lock is present behind the door.

Model 8550, 8560 Installation and Combination Changing Instructions, March 2007 · Sargent & Greenleaf, Inc. · 2007