Safesmiths Catalog Field reference · pilot

Sargent & Greenleaf 2937

  • Maker Sargent & Greenleaf
  • Also called 2937-200
  • Families S&G Magic Module footprint (mounting-compatibility group)
  • Status active

Summary

Specifications

rating

Printed: meets federal specification FF-L-2937 for life safety.

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

UL Listed combination locks, Group 1 and Group 1R: models 8550, 8555, 8560, 8565 and 2937 (UL certificate 20140106-BP200, report BP200-19750519, issued 2014-01-06 to Sargent & Greenleaf Inc). Investigated by UL under UL 768, Combination Locks. The certificate does not assign a group to each model.

UL Certificate of Compliance 20140106-BP200, Sargent & Greenleaf combination locks Groups 1 and 1R (8550, 8555, 8560, 8565, 2937), 2014-01-06 · UL LLC · 2014

Title: S&G Model 2937 Group 1 combination lock: installation and combination changing instructions

Sargent and Greenleaf Model 2937 Group 1 Combination Lock Installation and Combination Changing Instructions, Document 630-754, revised 9/7/2007 · Sargent & Greenleaf, Inc.

Sargent and Greenleaf (S&G), 2937 | N/A | Mechanical combination lock | Spyproof dial operated, bolt like lock | No batteries Required | FF-L-2937 (Types of Locks table, Federal Specification FF-L-2740 and FF-L-2937)

GSA-Approved Security Container and Vault Door Program Purchasing Guide, June 2026 · U.S. General Services Administration · 2026

2937 Model Group 1 Mechanical Safe Lock page (rev 6/23/2014). UL Listed Group 1; meets Federal Specification FF-L-2937; National Stock Number 5340-01-566-7405.

Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014

relockers

Integral thermal relock component.

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

lock dimensions

Introduction: spindle hole through the mounting plate, made using the template: The hole should have a diameter of 1/2 in (12,7 mm)

Sargent and Greenleaf Model 2937 Group 1 Combination Lock Installation and Combination Changing Instructions, Document 630-754, revised 9/7/2007 · Sargent & Greenleaf, Inc.

accessories

Introduction: Note: some applications need the lock bolt to retract flush with the case end when open. The 2937 kit includes a short bolt for those cases

Sargent and Greenleaf Model 2937 Group 1 Combination Lock Installation and Combination Changing Instructions, Document 630-754, revised 9/7/2007 · Sargent & Greenleaf, Inc.

INSTALLING THE SPY-PROOF DIAL COVER: Spy-Proof dial cover fastens to the dial ring at two points, one on each side; Cover fastened with 4-40 socket head cap screw (3/32" hex driver) at each of the two points.

Sargent and Greenleaf Model 2937 Group 1 Combination Lock Installation and Combination Changing Instructions, Document 630-754, revised 9/7/2007 · Sargent & Greenleaf, Inc.

Spy-Proof cover need not be removed to change the lock's combination.

Sargent and Greenleaf Model 2937 Group 1 Combination Lock Installation and Combination Changing Instructions, Document 630-754, revised 9/7/2007 · Sargent & Greenleaf, Inc.

catalog date

2014-03

drawing dimensions

Standard-size mechanical lock case, stated valid for all 2937, 6600, 6700, 8400 and 8500 series locks: case 3.343 (84,9 mm) x 2.397 (60,9 mm); mounting holes 2.624 (66,6 mm) x 1.624 (41,2 mm); spindle center to the bolt-side hole column 1.937 (49,2 mm).

Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014

Dimensions-Standard Size Mechanical Lock Bolts: same six bolts and values as the parts list: 6730-003-140 2.461 in (62,5 mm) locked / 2.109 in (53,6 mm) unlocked; 6730-003-074 0.961 (24,4 mm) / 0.609 (15,5 mm); 6730-003-069 0.461 (11,7 mm) / 0.109 (2,8 mm); 6730-003-166 metric tapped 0.461 / 0.109, tapped 10 mm for two 4 mm-7 pitch screws; 6730-003-167 short tapped brass 0.352 (8,9 mm), retracts flush, tapped 3/8 in (9,5 mm) for two 10-32; 2937-003-166 short tapped stainless, same.

Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014

Bolt 1.000 (25,4 mm) high, throw 0.35 (8,9 mm),.312 (7,9 mm) thick, 0.281 (7,1 mm) from the case back edge.

Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014

Case depth: 1.121 (28,5 mm) for 2937, 6600, 6700 and 8500 series 3-wheel locks; 1.334 (33,8 mm) for 6600 and 6700 series 4-wheel locks; 1.407 (35,7 mm) for 8400 series 3-wheel locks.

Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014

A 2001 catalog's 1.211 in beside the same 28.5 mm was a digit transposition of 1.121 in.

Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014

feature function

Printed: standard left-right-left dialing with push to open. Dialing turns and counts are not printed.

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

Steps not printed. Printed: key-changeable wheel design.

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

Printed: carbide barrier pins and a shear line in the dial spindle to control the point of separation; internal relock trigger; integral thermal relock component; unique torque adjuster; stainless steel bolt; tested to exceed 20 man-hours of manipulation resistance.

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

Not printed in this catalog (anti-autodialer feature).

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

Installation step 2: Lock case has a hardened steel washer at the spindle hole (Figure 2). It is to remain in place during lock installation

Sargent and Greenleaf Model 2937 Group 1 Combination Lock Installation and Combination Changing Instructions, Document 630-754, revised 9/7/2007 · Sargent & Greenleaf, Inc.

COMBINATION CHANGING FROM 50 - 0: Do not set the third combination number between 90 and 99 or between 0 and 10. This area is called the forbidden zone. Adjacent combination numbers is to be no less than 5 numbers apart.... Caution: Only use change key 6720-043-001 on the 2937 series lock

Sargent and Greenleaf Model 2937 Group 1 Combination Lock Installation and Combination Changing Instructions, Document 630-754, revised 9/7/2007 · Sargent & Greenleaf, Inc.

TORQUE ADJUSTMENT: Torque adjustment sets the wheel pack tension; To adjust torque: remove the lock cover; turn the adjusting gear with a 3/32" hex wrench (see Figure 1); Clockwise raises torque; counterclockwise lowers torque.

Sargent and Greenleaf Model 2937 Group 1 Combination Lock Installation and Combination Changing Instructions, Document 630-754, revised 9/7/2007 · Sargent & Greenleaf, Inc.

Step 10, Figure 7: drive cam spline keyways for four mountings labelled “VU Mount”, “LH Mount”, “RH Mount”, “VD Mount”; step 11: The spindle spline listed keyway and drive cam spline keyway should line up closely (vertical-up—VU, right-hand—RH, etc.). The LOCK TEMPLATE is labelled LEFT-HAND, VERTICAL-UP, VERTICAL-DOWN and RIGHT-HAND.

Sargent and Greenleaf Model 2937 Group 1 Combination Lock Installation and Combination Changing Instructions, Document 630-754, revised 9/7/2007 · Sargent & Greenleaf, Inc.

DIALING THE COMBINATION TO OPEN THE LOCK: On the dial ring are two index marks; Top index: for normal dialing and opening; Left index: only for use when changing the combination.

Sargent and Greenleaf Model 2937 Group 1 Combination Lock Installation and Combination Changing Instructions, Document 630-754, revised 9/7/2007 · Sargent & Greenleaf, Inc.

lock options

Part 2937-200: kit with lock, dial, ring and drilled-and-tapped bolt (standard length, extra short) for Mosler retrofit.

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

Part 2937-002: Spy-proof dial only.

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

Part 2937-003: dial ring and dust cover.

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

Part 2937-004: dust cover only.

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

maintenance

FF-L-2937 mechanical combination locks (§5.1.2.1): clean bearing surfaces of dial, dial ring, wheel post, drive cam; replace lubricant. Adjust wheel-pack torque to not less than 16 ozf·in and not more than 24 ozf·in.

FED-STD-809E, Inspection, Maintenance, Neutralization and Repair of GSA Approved Containers, Lock Extensions and Vault Doors, February 2023 · 2023

SERVICE AND REASSEMBLY: for lock lubrication S&G recommends Shell Aeroshell 22; using any other lubricant voids the warranty on the product

Sargent and Greenleaf Model 2937 Group 1 Combination Lock Installation and Combination Changing Instructions, Document 630-754, revised 9/7/2007 · Sargent & Greenleaf, Inc.

specifications

Meets Federal Specification FF-L-2937; three all-metal wheels give 1,000,000 theoretical combinations.

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

Installation step 2: Mount the lock with four 1/4-20 attaching screws (provided)

Sargent and Greenleaf Model 2937 Group 1 Combination Lock Installation and Combination Changing Instructions, Document 630-754, revised 9/7/2007 · Sargent & Greenleaf, Inc.

TORQUE ADJUSTMENT note: Keep the model 2937 adjusted to no less than 16 and no more than 24 inch-ounces of wheel pack torque

Sargent and Greenleaf Model 2937 Group 1 Combination Lock Installation and Combination Changing Instructions, Document 630-754, revised 9/7/2007 · Sargent & Greenleaf, Inc.

SERVICE AND REASSEMBLY step 6: Lever screw torque should be between 22 and 26 inch-pounds

Sargent and Greenleaf Model 2937 Group 1 Combination Lock Installation and Combination Changing Instructions, Document 630-754, revised 9/7/2007 · Sargent & Greenleaf, Inc.

2937 Model Group 1 mechanical safe lock: stainless steel bolt rated for at least 600 lbs of side and end load; dial spindle has carbide barrier pins; shear line sets the separation point; three all-metal wheels, 1,000,000 combinations.

Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014

Dial spindle has carbide barrier pins; shear line sets the separation point; left-right-left dialing with push to open; key-changeable wheels; internal relock trigger; torque adjuster; integral thermal relock component.

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

Stainless steel bolt, drilled and tapped, withstands 600 lbs of side and end pressure. National Stock Number 5340-01-566-7405 (DLA).

Sargent and Greenleaf Product Catalog, March 2021 · Sargent and Greenleaf · 2021

Underwriters Laboratories manipulation testing exceeds 20 man-hours; internal relock trigger; integral thermal relock component; two-way drive cam and two-way dial spindle (RH, LH, VU, VD); uses the standard S&G three-wheel change key (U8 or U9).

Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014

Parts: 2937-200 is the lock with dial and ring and an extra short drilled and tapped bolt, for some Mosler retrofits; 2937-002 Spy-Proof dial only; 2937-003 dial ring and dust cover; 2937-004 dust cover only.

Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014

Dial spindle fits a door up to 3.6 in (91.4 mm) thick.

Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014

One-year limited warranty counted from the shipment date (terms of 2026-10).

Sargent and Greenleaf Model 2937 product page, sargentandgreenleaf.com, accessed 2026-10-25 (JS-rendered) · Sargent & Greenleaf (ASSA ABLOY) · 2026

The maker says the footprint of this lock follows that of most mechanical and electronic safe locks; no mounting dimensions are given.

Sargent and Greenleaf Model 2937 product page, sargentandgreenleaf.com, accessed 2026-10-25 (JS-rendered) · Sargent & Greenleaf (ASSA ABLOY) · 2026

Restricted

Opening

Member content. 1 fact on file. The values are not shown here.

Neutralization

Member content. 3 facts on file. The values are not shown here.