AMSEC ESL10
Summary
- rating: UL label on the lock body side: 'SECURITY [UL] LISTED / HIGH SECURITY ELECTRONIC LOCKS TYPE 1 / 5R02'. Box…
- relockers: Series statement (AMSEC MAX15): the ESL10 lock is protected by an internal relock mechanism.
- locking system: Patented dead-latched lock design; internal relock device; auto-locks when the boltwork is thrown; slam-bolt…
- finish: Metal die-cast keypad housing with an alphanumeric slanted keypad (printed for the ESL series); colors…
- order code: Box label: 'Part No. 0616343 / LOCK KIT, LIGHTED ESL10, BLACK / Production Date: Jul.11,2025 / MADE IN…
- mounting: Printed (Part #4305537 rev 10/23), exact wording: 'This ESL series lock is a retrofittable electronic safe…
- American Security Product Catalog, 2022-2023 · American Security, Fontana, CA · 2022
- AMSEC ESL10 lock kit P-N 0616343 (2026-10-19) · 2026
- AMSEC ESL10-20 Installation Instructions, Part 4305537, revised 10-23 · American Security
Specifications
rating
UL label on the lock body side: 'SECURITY [UL] LISTED / HIGH SECURITY ELECTRONIC LOCKS TYPE 1 / 5R02'. Box marked 'Type I Listed'.
AMSEC ESL10 lock kit P-N 0616343 (2026-10-19) · 2026
relockers
Series statement (AMSEC MAX15): the ESL10 lock is protected by an internal relock mechanism.
American Security Product Catalog, 2022-2023 · American Security, Fontana, CA · 2022
Patented dead-latched lock design; internal relock device
American Security Product Catalog, 2022-2023 · American Security, Fontana, CA · 2022
lock dimensions
Measured from tape-measure photos, ESL10 kit 0616343: lock body 3.48 ± 0.10 in long x 2.33 ± 0.08 in wide (88.4 x 59.2 mm), connector block excluded.
AMSEC ESL10 lock kit P-N 0616343 (2026-10-19) · 2026
lock mounting holes (3 visible, two at one end and one at the other) 2.73 ± 0.07 in apart along the length and 1.66 ± 0.04 in apart across (69.3 x 42.2 mm).
AMSEC ESL10 lock kit P-N 0616343 (2026-10-19) · 2026
Dropped as too uncertain: body thickness about 1.2 ± 0.1 in (side views disagree by about 10%); keypad diameter (3.5-4.2 in depending on the unknown keypad height).
AMSEC ESL10 lock kit P-N 0616343 (2026-10-19) · 2026
mounting hole diameter about 0.28 ± 0.02 in (it agrees with 1/4-20 screw clearance, which supports the height correction); Side views also gave a shorter length (3.19-3.26 in), probably camera obliquity, so length carries a larger error.
AMSEC ESL10 lock kit P-N 0616343 (2026-10-19) · 2026
Comparison: Group 2 mechanical footprint in the catalog (Ilco 673/685, Kaba Mauer 2006) is case 84.9 x 60.7 mm (3.34 x 2.39 in), holes 66.6 x 41.2 mm (2.62 x 1.62 in): width and cross-hole spacing agree.
AMSEC ESL10 lock kit P-N 0616343 (2026-10-19) · 2026
the ESL10 plate measures about 0.1 in longer and the long hole spacing 0.11 in longer (just outside the error), in line with the printed 'footprint similar to' Group 2; the ESL10 has 3 mounting holes (3 socket head screws supplied), not 4.
AMSEC ESL10 lock kit P-N 0616343 (2026-10-19) · 2026
Measured from tape-measure photos (28 mm-equivalent lens, f about 3320 px).
AMSEC ESL10 lock kit P-N 0616343 (2026-10-19) · 2026
Tape scale read from the 1/16-1/8 in tick period (379 px/in in one photo, 341 px/in in the other); faces raised above the tape plane are corrected by pinhole scale (1 - h/D), D = f / scale, with h = lock thickness about 1.2 in (factor about 0.86-0.88).
AMSEC ESL10 lock kit P-N 0616343 (2026-10-19) · 2026
Error includes edge picking, scale, thickness and focal-length uncertainty and an allowance for camera tilt.
AMSEC ESL10 lock kit P-N 0616343 (2026-10-19) · 2026
locking system
Patented dead-latched lock design; internal relock device; auto-locks when the boltwork is thrown; slam-bolt version offered for locker applications; 15-minute penalty lockout after four wrong entries.
American Security Product Catalog, 2022-2023 · American Security, Fontana, CA · 2022
Printed (Part #4305537 rev 10/23): 'The solenoid lock of the ESL 10/20 is not capable of pulling any auxiliary devices. Do not attach a bolt extension or other hardware to this lock.'
AMSEC ESL10-20 Installation Instructions, Part 4305537, revised 10-23 · American Security
finish
Metal die-cast keypad housing with an alphanumeric slanted keypad (printed for the ESL series); colors printed on the same page: black nickel, chrome, brass (the column layout does not say which model each color list belongs to, so it is scoped to the series).
American Security Product Catalog, 2022-2023 · American Security, Fontana, CA · 2022
Kit 0616343 is the black version (box: 'ESL10, BLACK'). Keypad face printed 'ESL10' and 'AMERICAN SECURITY'; round housing with 12 keys 1-9, C, 0, # (letters ABC, DEF, GHI, JKL, MNO, PRS, TUV, WXY).
AMSEC ESL10 lock kit P-N 0616343 (2026-10-19) · 2026
order code
Box label: 'Part No. 0616343 / LOCK KIT, LIGHTED ESL10, BLACK / Production Date: Jul.11,2025 / MADE IN CHINA'; box marked American Security EST 1946, ESL SERIES Lighted Electronic Safe Locks, UL Type 1 Listed, QTY 1, serial number EL10416219 (photographed unit).
AMSEC ESL10 lock kit P-N 0616343 (2026-10-19) · 2026
mounting
Printed (Part #4305537 rev 10/23), exact wording: 'This ESL series lock is a retrofittable electronic safe lock that will replace any conventional mechanical safe combination lock having a footprint similar to that of the U.L.
AMSEC ESL10-20 Installation Instructions, Part 4305537, revised 10-23 · American Security
Tools required (printed, Part #4305537 rev 10/23): Phillips head screw driver; 3/16 in hex Allen wrench or driver; non-permanent thread locking compound, like Blue Locktite.
AMSEC ESL10-20 Installation Instructions, Part 4305537, revised 10-23 · American Security
Printed (Part #4305537 rev 10/23, steps 4-5): remove the keypad base by twisting it about 1/8 turn counter clockwise and unplug the lock cable by tripping the small tab on the connector inside the keypad.
AMSEC ESL10-20 Installation Instructions, Part 4305537, revised 10-23 · American Security
Printed (Part #4305537 rev 10/23, step 6): thread locking compound in the lock mounting screw holes; pass the cable connector-first through the door and loop it into the channel under the lock.
AMSEC ESL10-20 Installation Instructions, Part 4305537, revised 10-23 · American Security
Printed (Part #4305537 rev 10/23, step 6): with the boltwork in the locked position the bolt must have daylight clearance around it, at least 1/16 in on all sides; otherwise modify the opening, or intermittent lock operation will result.
AMSEC ESL10-20 Installation Instructions, Part 4305537, revised 10-23 · American Security
listed Group 2 Mechanical locks.' Recorded as printed ('similar to'); this is not a Magic Module claim, and no Group 2 coordinates or dimensions are inherited from it.
AMSEC ESL10-20 Installation Instructions, Part 4305537, revised 10-23 · American Security
place the base over the spindle hole on the old dial ring mounting holes and fix it with the 8-32 x 3/8 in flat head screws (hand screwdriver only on thin face plates).
AMSEC ESL10-20 Installation Instructions, Part 4305537, revised 10-23 · American Security
if the mount plate is thin, less than 1/4 in, the nylon washers are necessary under the screw heads; snug the 3 socket head screws with a 3/16 in hex driver and do not over-tighten.
AMSEC ESL10-20 Installation Instructions, Part 4305537, revised 10-23 · American Security
accessories
Supplied parts printed (Part #4305537 rev 10/23): ESL 10/20 Lock Assembly; 8-32 x 3/8 in self tap flat head Phillips screws (for keypad base mounting); 1/4-20 socket head screws (for lock mounting; step 6 says 'the 3 socket head screws'); [3] 1/4 in nylon washers (for lock mounting); [2] 8-32 x 5/16 in Phillips head screws (for re-lock trigger mounting). Use only the parts and fasteners included in the kit.
AMSEC ESL10-20 Installation Instructions, Part 4305537, revised 10-23 · American Security
battery type
Printed (Doc 4305119 Rev D, item d): if the lock fails to open or acts strange, replace the batteries with good quality fresh alkaline 9 volt batteries (plural on this sheet); replace them once a year to prevent corrosion damage from leakage.
AMSEC ESL10 Operating Instructions and Combination Changing Instructions, Doc Part No. 4305119 Rev D, Sept 26 2024 · 2024
Printed (Part #4305537 rev 10/23): 'When the lock fails to open, try a fresh 9V Alkaline Battery' (singular here; the operating sheet says batteries). Do not pull on the cable when changing the battery.
AMSEC ESL10-20 Installation Instructions, Part 4305537, revised 10-23 · American Security
catalog date
2023
code capacity
Printed (Doc 4305119 Rev D, item f): 'The ESL10 uses a fixed length 6 (six) digit combination.'
AMSEC ESL10 Operating Instructions and Combination Changing Instructions, Doc Part No. 4305119 Rev D, Sept 26 2024 · 2024
feature function
Printed (Doc 4305119 Rev D, item h): if the unit is left without input for 10 (ten) seconds at any time during opening or combination changing, it returns to a resting condition; if this happens during a combination change the old combination is retained.
AMSEC ESL10 Operating Instructions and Combination Changing Instructions, Doc Part No. 4305119 Rev D, Sept 26 2024 · 2024
Printed (Doc 4305119 Rev D, item i), anti-peek user feature: the unit registers the first 5 digits into the input buffer and the 6th digit is the last numeric key pressed before '#'; e.g. C-1-2-3-4-5-7-4-5-2-7-6-# is accepted as C-1-2-3-4-5-6-#.
AMSEC ESL10 Operating Instructions and Combination Changing Instructions, Doc Part No. 4305119 Rev D, Sept 26 2024 · 2024
Printed (Part #4305537 rev 10/23), anti-peek: the last numeric keystroke of the combination can be any number of keystrokes as long as the proper key is pressed before '#'; with the factory code C-1-2-3-4-5-6-#, keying C-1-2-3-4-5-7-3-8-2-4-7-6-# still opens.
AMSEC ESL10-20 Installation Instructions, Part 4305537, revised 10-23 · American Security
Described as a security feature that lets the user baffle an onlooker trying to memorize the combination (extra keystrokes before '#').
AMSEC ESL10 Operating Instructions and Combination Changing Instructions, Doc Part No. 4305119 Rev D, Sept 26 2024 · 2024
lockout period
Printed (Doc 4305119 Rev D, item b): if four (4) incorrect combinations are entered the lock goes into 'Penalty Lockout' for 15 minutes; the keypad flashes once every 5 seconds during the penalty period, and any key pressed during lockout gives 8 rapid flashes with a chirp.
AMSEC ESL10 Operating Instructions and Combination Changing Instructions, Doc Part No. 4305119 Rev D, Sept 26 2024 · 2024
Printed (Part #4305537 rev 10/23): four (4) bad combination keying attempts cause a 15 minute lockout; any keystroke gets a rapid succession of beeps and flashes; the keypad flashes every 5 seconds while in lockout and beeps once when the lockout has expired. 'Disconnection of power only re-starts the lockout clock.'
AMSEC ESL10-20 Installation Instructions, Part 4305537, revised 10-23 · American Security
maintenance
Printed (Part #4305537 rev 10/23): the lock is a sealed unit with no reason to take it apart; breaking the seal voids the manufacturer's warranty, and the keypad cable must be disconnected before any disassembly or the electronics may be damaged. Lock the safe in the OPEN position for the whole installation.
AMSEC ESL10-20 Installation Instructions, Part 4305537, revised 10-23 · American Security
power source
Photographed keypad interior (non-attack facts only): two 9V alkaline cells (one marked DURACELL 6LR61 9V MN1604 'Not for Retail Sale'); board marked 'ESL10/20 3V KEYPAD 3.05' with a 'Jul/25' sticker; lock cable uses an RJ-style modular jack and plug. A round black part marked '030' with wires is a buzzer (identified 2026-10-19), not a coin cell.
AMSEC ESL10 lock kit P-N 0616343 (2026-10-19) · 2026
specifications
ESL10 column of the lock comparison chart: round keypad; U.L. Type 1; 1 user; no time delay override; 1 safe door; two 9V batteries, no A/C option; 6 digit combination; wrong-try lockout yes (15 min.).
American Security Product Catalog, 2022-2023 · American Security, Fontana, CA · 2022
ESL10 also: auto lock yes; bolt options standard or slam. Not available: dual mode, time delay, time lock, duress, audit trail, PC audit records, alarm interface.
American Security Product Catalog, 2022-2023 · American Security, Fontana, CA · 2022
spindle diameter
ESL10 cable: a 1/2 in spindle hole passes it with its connector intact, so no cutting or re-crimping is needed.
American Security Product Catalog, 2022-2023 · American Security, Fontana, CA · 2022
Printed (Part #4305537 rev 10/23, step 3): the cable requires a 1/2 in diameter hole through the door to pass the connector; drill or ream if necessary and chamfer both ends to avoid wire damage.
AMSEC ESL10-20 Installation Instructions, Part 4305537, revised 10-23 · American Security
Chase the lock mounting screw holes with a 1/4-20 tap and the dial mounting screw holes with an 8-32 tap if necessary.
AMSEC ESL10-20 Installation Instructions, Part 4305537, revised 10-23 · American Security
notes
Used as lightweight retrofit on AMSEC Japanese data safe sheet-metal mounts; older ESL preferred vs heavier Kaba/S&G elocks for pull on screws.
The National Safeman - Microdrilling - Autumn 2007 · N.S.O., a division of National Publishing Co., Streamwood, IL · 2007
Lock cover label: 'ELECTRONIC SAFE LOCK / NOTICE: Warranty VOID if seal is broken. There are no field serviceable parts in this lock. DO NOT lubricate this lock with Graphite or Petroleum Based Lubricants or lockout will result. / Patents 5249831, 6098433 / American Security Products Co. Fontana, CA / MFG Code M4 - 9VDC - MFG 06/2025'; separate tag 'P/N: 0616343'; serial label 'SERIAL NO. EL10416219'. The lock body is dated MFG 06/2025; the kit box is dated Jul. 11, 2025.
AMSEC ESL10 lock kit P-N 0616343 (2026-10-19) · 2026
WARNING tag on the lock cover (photos): the tag is attached with the correct screws for Relock Trigger mounting; use only these supplied screws, as other screws may damage the circuit board inside the lock and void the warranty; remove and discard the tag before lock installation.
AMSEC ESL10 lock kit P-N 0616343 (2026-10-19) · 2026
Serial labels (photographed unit): lock side label 'EL10416219 649382'; back plate label 'EL10416219' (photo).
AMSEC ESL10 lock kit P-N 0616343 (2026-10-19) · 2026
AMSEC history page: AMSEC released the ESL10 in 1998.
AMSEC Electronic Locks, Ultimate Security Solutions for Home and Business, Dealer Part 4305365, October 2020 · American Security Products Co., 11925 Pacific Avenue, Fontana, CA 92337 · 2020
Template outer size 3.08×3.50 in; mounts with 8-32 dial-ring screws; Bullet II base attaches with 8-32 rig screws.
Lockmasters template instruction sheets and packages (2026-10-19) · LOCKMASTERS INCORPORATED
Takes an ESL10 or ESL20 keypad, with no serial condition.
American Security knowledge base page: ESL 10 Lock compatibility | American Security, americansecuritysafes.com, accessed 2026-10-27 · American Security (AMSEC), Fontana, CA · 2026
ESL15 compatibility page: ESL10 and ESL20 are compatible with each other.
American Security knowledge base page: ESL 15 Lock compatibility | American Security, americansecuritysafes.com, accessed 2026-10-27 · American Security (AMSEC), Fontana, CA · 2026
AMSEC electronic lock comparison chart: lists ESL10 among compared electronic safe locks (UL Type 1 column present on the chart).
AMSEC Electronic Safe Lock Comparison Chart (undated one-sheet) · American Security Products Co. (AMSEC)
Restricted
Drill points
Member content. 9 facts on file; 3 drill-plate points on file. The values are not shown here.